In this guide
  1. Is the glass holding wax, a separate candle or an outer sleeve?
  2. Which job does the candle glass perform?
  3. How do jar, holder and hurricane constructions differ?
  4. How do four catalogue references differ in construction?
  5. Which parts belong in the supplied candle set?
  6. What should the complete candle system review include?
  7. Continue your buying brief

Choose candle glass by its job: containing poured wax, receiving a separate candle, or surrounding a candle and its support. Then identify the parts included in the order. A small cup is not automatically suitable for direct filling, and a product called a hurricane is not necessarily an open-ended sleeve. The construction and the specified candle use matter more than the name.

For a fragrance brand, the purchased unit might be an empty jar that goes to a filler. For a hospitality buyer, it might be a glass holder, a separately replenished candle and a base. These briefs can look similar in a styled photograph but require different supply sets.

In this guide
Original comparison of a direct-fill candle jar, a cup holding a separate votive and an open-ended hurricane sleeve with a separate base
Original generic schematic, with an exploded sleeve-and-base view. These are examples of roles, not fixed rules for every product name. No catalogue dimensions, candle fit or use approval are implied.

Is the glass holding wax, a separate candle or an outer sleeve?

Describe the complete construction before selecting the catalogue reference. A direct-fill jar contains the poured candle mixture; a holder supports a separate candle; an open hurricane sleeve needs its supporting base and candle arrangement identified.

Product names can overlap, so send a section sketch or an identified sample showing the glass, candle and base together. Then use the candle vessel buying guide for the wider brief. An image alone does not confirm heat suitability or permission to use a particular candle arrangement.

Which job does the candle glass perform?

Start with one question: what will be placed directly inside the glass? Describe the intended mode before comparing colours, rim profiles or quantities.

On a small screen, scroll across the comparison to read every column.

Three intended roles lead to different supply units
Intended roleWhat the glass doesWhat the brief needs to identify
Direct-filled candle vesselThe wax is poured into the vessel and the vessel remains part of the finished candle.The exact jar, intended fill and complete candle development route. A lid is a separate component if required.
Holder for a separate votive or tealightThe selected candle is placed in a holder rather than assuming the glass will be filled.The actual candle reference, whether it has its own cup, and the matched holder construction.
Hurricane enclosureThe glass surrounds a candle and its support. An open-ended sleeve needs a separate supporting arrangement.The sleeve or closed-base form, candle, supporting base and which parts are supplied together.

For direct-fill jar selection, use the existing glass candle vessel guide. If the question is how much wax a selected vessel will hold, the capacity and wax-weight guide covers that separate measurement task.

How do jar, holder and hurricane constructions differ?

“Votive holder” does not settle the filling method. CandleScience’s specific glass votive holder is described for a matched moulded votive and also for direct-poured container wax. That is a use statement for that product, not permission to fill any small glass cup. Ask for the intended mode of the particular reference being offered.

“Hurricane” or “storm lantern” does not settle the bottom construction. LSA International’s Terrace Storm Lantern has a curved base and solid glass foot. JUNOVA Glass’s JN-020 clear hurricane sleeve, by contrast, is described as open-ended for a separate pillar candle and base. An open-ended sleeve is an enclosure; on its own, it is not a wax container.

Request a view from above, a view of the underside and a view with the parts separated. Mark whether there is a glass floor, an opening through the bottom, or a removable insert. A broad flange or metal stem can change the appearance without explaining where the candle rests. The supplier’s drawing and actual sample should resolve that point.

How do four catalogue references differ in construction?

The following JUNOVA Glass forms provide different starting directions within the candle and fragrance glassware collection. Their names and current descriptions identify the visual form; the open questions below still belong in the project brief.

Catalogue form versus the construction still to define
ReferenceCurrent form descriptionUseful next question
JN-004 ribbed glass votiveA clear glass form with vertical ribbing.Is the selected cup intended for direct fill or for the exact separate candle proposed?
JN-020 clear hurricane sleeveAn open-ended sleeve for a separate pillar candle and base.Which base supports the candle, and are the base and candle included or separately sourced?
JN-021 flanged hurricane holderClear hurricane glass with a broad flanged base.What is the underside construction, and where does the candle sit in the proposed assembly?
JN-022 stemmed hurricane holderAmber hurricane glass raised on a polished metal stem.Does the supply include the stem and foot, and how are glass and support matched?

Do not transfer the size, material or candle-use claims of a similar-looking retail item to these references. The selected dimensions, candle and support arrangement need their own matched information.

Which parts belong in the supplied candle set?

Write the supply unit as a short list of named parts. “One hurricane” is less useful than “one open-ended glass sleeve; one matched supporting base; candle supplied separately.” This makes two quotations comparable and exposes a missing part before sampling.

Consider two illustrative briefs:

Download the blank candle glass supply-set map (CSV). It has a row for the glass, candle, base or stem, insert and optional lid. Mark each as included, separately sourced, not required or unresolved, then name the responsible party and matched reference. It is a procurement aid, not a completed inspection or test record.

If two vendors supply different parts, send the same assembly reference to both. Ask who will confirm the combined fit, intended use and final instructions. A drawing of the glass alone cannot establish the scope of a complete candle-holder set.

What should the complete candle system review include?

Physical fit and appearance are only part of the decision. Agree the relevant evaluation of the actual glass, candle, finish, inserts and support for the intended application and destination. A styled image, the word “hurricane” or the presence of a glass wall does not establish heat performance, outdoor suitability or wind protection.

The National Candle Association’s safety guidance calls for stable, heat-resistant surfaces, sturdy holders and avoiding drafts. Apply the instructions for the selected candle and holder; a surround is not a substitute for them. For hospitality projects, establish the venue’s permitted candle arrangement before finalising the supply set.

Send the preferred catalogue reference, intended direct-fill or separate-candle mode, and named parts through custom glass development. JUNOVA Glass can then review the actual project scope rather than infer a complete assembly from a photograph.

If the design calls for a curved cover or a particular glass grade, see how curved borosilicate parts are made before requesting a sample.

Continue your candle packaging brief

For a project enquiry, send the selected jar, target fill, lid, finish, quantity and destination.

Compare glass candle jars