In this guide
  1. How much diffuser reed will project above the rim?
  2. How do full, inserted and exposed reed lengths differ?
  3. How do two reed lengths compare at one insertion?
  4. How do display height and packed reed length differ?
  5. What should you send for a bottle and reed layout?
  6. Continue your buying brief

Choose a reed diffuser reed length by measuring the complete stick and its position in the selected bottle. The length printed on a reed bag is not the length visible above the rim. Outside bottle height, internal insertion and assembled display height are different measurements.

This guide helps home-fragrance buyers coordinate a glass bottle, a proposed reed set and a retail pack. It provides a geometry comparison, not a universal reed-to-bottle ratio or a prediction of fragrance strength.

In this guide
Original conceptual section showing total reed length L, inserted length I and projection P above the bottle rim
Original geometry illustration, not to scale. The bottle is conceptual, with no JUNOVA Glass dimensions, liquid level or demonstrated diffusion result.

How much diffuser reed will project above the rim?

For a straight reed at an identified position, subtract the length inside the bottle from the full reed length. The result is the length along the reed above the rim, not the vertical height of a leaning or fanned display.

Reed projection check

Measure both lengths along the same reed, using the same rim reference.

Method: Exposed length P (mm) = full length L (mm) − inserted length I (mm).

The inside section is not automatically the oil-immersed section. The tool does not recommend a reed size or predict fragrance strength; measure the actual display and separately packed bundle.

Review material, diameter and count as separate variables. A reed supplied loose in a box still occupies its full length, so its exposed length cannot size the pack pocket.

How do full, inserted and exposed reed lengths differ?

Use one rim reference and measure along the reed. L is the full end-to-end reed length. I is the section inside the bottle, from that rim reference to the lower tip in the chosen seated position. P is the section projecting beyond the rim. For a straight reed at that position, P = L − I.

The inserted section includes any part above the liquid but below the rim. It is therefore not automatically the oil-immersed length. Nor is I the outside height of the glass: the internal base, shoulder, opening and reed position can change where the lower tip sits. Measure the selected assembly instead of subtracting a catalogue bottle height from the reed length.

Supplier descriptions demonstrate why the reference matters. CandleScience's natural reed page lists a 10-inch length, equivalent to 25.4 cm, separately from its diameter. Those are its component specifications, not JUNOVA Glass's offer. Keep a supplier's full length and stated units beside the actual reed reference; do not silently rewrite it as an exposed length.

How do two reed lengths compare at one insertion?

Consider two invented candidates of 200 mm and 250 mm. Assume both are straight and each has 90 mm inside the same conceptual bottle at the marked rim reference. Candidate A projects 200 − 90 = 110 mm; candidate B projects 250 − 90 = 160 mm. The extra 50 mm remains outside only because insertion was held constant.

Horizontal comparison of hypothetical 200 and 250 millimetre reeds with the same 90 millimetre insertion and projections of 110 and 160 millimetres

All example lengths are illustrative. They are not an approved bottle depth, recommended reed size or JUNOVA Glass accessory specification.

If the second reed rests at a different angle or position, remeasure I and the actual display. A number obtained from the first arrangement no longer describes the second. The arithmetic helps explain the difference; it does not select a winning reed or prove a scent outcome.

Material, diameter and count remain separate choices. Our rattan versus fiber comparison guide explains how to keep a material trial interpretable. A length change is another variable to identify in that trial, rather than a reason to attribute every difference to the glass.

How do display height and packed reed length differ?

For a shelf or display photograph, record the vertical distance from the supporting surface to the highest reed tip in the intended arrangement. P is measured along the reed, so a leaning reed's projection is not its vertical rise. A fanned bundle also needs its own widest outline. Check the complete proposed arrangement on the actual sample rather than treating a straight-line sketch as a display envelope.

NorthWood's diffuser FAQ discusses reed extension above the bottle and the effect of an overly tall arrangement on handling. Treat such supplier advice within its product context; it does not establish one required proportion for every bottle, reed and formulation. Have the responsible development team review the proposed assembly and its intended use.

Keep the two size decisions separate
DecisionMeasurement to sendWhat it does not establish
Assembled displayActual vertical tip height and spread, with the reed position photographedRequired box interior or diffusion performance
Separately packed reedsFull unbent reed length and the proposed bundle or sleeve outlineFinished display height or a safe transport design

A reed packed beside the closed bottle still occupies its full component length. Do not use only the exposed portion to size its pocket. Give the packaging designer the identified parts and proposed packing arrangement; the designer must resolve placement, protection and the finished pack dimensions. Our plug and collar guide covers the separate packed-versus-in-use closure question.

What should you send for a bottle and reed layout?

Send a marked photograph showing the rim reference and reed position, the full reed reference and length, and the actual assembled outline. State whether reeds travel separately and identify the proposed pack layout. Keep the geometry decision separate from formulation compatibility and the agreed performance evaluation.

JUNOVA Glass's JN-DB004 dome-top cylindrical diffuser bottle is a visual starting reference for the glass form. Its page requires the opening, dimensions and accessory fit to be confirmed; it does not publish a matched reed length or a complete tested kit. Use the selected sample for this measurement discussion, then record accepted revisions through the sample approval process.

Browse candle and fragrance glass or discuss the bottle and component scope through custom glass development. Ask for the unresolved measurements by name, rather than ordering a reed set from bottle capacity alone.

Check reed reach as the fill drops, too. The guide to a diffuser that has stopped smelling explains how to inspect the reed ends at low fill.

Continue your diffuser packaging brief

For a project enquiry, send the bottle reference, neck drawing, proposed parts, finish, quantity and destination.

Compare glass diffuser bottles